Product Information

DJI Spreading Wings S900 + A2 + Zenmuse Z15-BMPCC


Model: DJI Spreading Wings S900 + A2 + Zenmuse Z15-BMPCC


Availability: Out of stock

  • Lightweight, Strong and Stable
  • Highly Portable, Easy to Carry
  • Professional Quality
  • S900 fully supports the Zenmuse Z15, GH3, GH4, and BMPCC gimbals
  • Includes: S900 A2 controller and Z15 BMPCC Gimbal
Quantity :

The S900's arms and landing gear are made of sturdy carbon fiber, greatly reducing weight while increasing stability and strength. This enables a long flight time without sacrificing performance. With arms that fold in to save space, the S900 is built to be taken wherever you need to go. Then when you want to fly, it can be ready to go in just a few minutes. Never before has a professional hexacoptor been so portable and easy to transport. The upper center board can be removed, allowing easy access to install your flight controller and IMU, and giving you a convenient way to setup the power distribution system. Even installation of your main controller, iOSD, Lightbridge, or any other accessories is faster and easier than ever before. This new center board structure is perfectly compatible with the DJI WKM and A2 flight controllers. A redesigned, rebuilt power distribution system improves safety and reliability. Gold-plated metal bearings with a unique screw design secure the power cords, ensuring cables will not come loose during flight and allowing easy setup. Sparkproof Plug,Prevent short circuits and easily plug in your power supply with the AS150 sparkproof plug. Professional Quality Weighing just 3.3kg, the S900 has a maximum takeoff weight of 8.2kg. This means you can easily carry most cameras and gimbals. Used with a 6S 12000mAh battery, it can fly for up to 18 minutes*. *Maximum flight time is tested on a breezeless day with a payload of 6.8kg, hovering at a height of 2 meters. Retractable landing gear and a special low gimbal mounting bracket gives you an extremely wide range of possible shooting angles and camera motions. DJI's Zenmuse camera gimbals are known for their stability, providing smooth footage capture in even the most difficult of conditions. The S900 fully supports the Zenmuse Z15, GH3, GH4, and BMPCC gimbals.

In the Box

  • DJI Spreading Wings S900 Hexacopter
  • Frame Arms x 6
  • Landing Skid Tubes x 2 (with Silicone Rubber Dampers)
  • Landing Gear Legs x 2
  • GPS Collapsible Mount
  • Springs x 2
  • Connector Set
  • 3-PIN Connection Cables x 8
  • CW propellers x 2
  • CCW propellers x 2
  • Magic tapes x 4
  • The red knobs x 6
  • Landing gear leg rings x 4
  • Soft dampers x 50
  • For frame arms mount: M4x35
  • For landing gear mount: M3x8, M2.5x8 (socket cap), M3x22 (socket cap)
  • Controller Unit (Built-in Receiver DR16)
  • PMU(Power Management unit)
  • IMU(Inertia Measurement Unit)
  • LED-BT-I
  • Micro-USB Cable
  • Servo Cables (2)
  • GPS Bracket
  • Double side sticky pads.
  • Gimbal
  • Gimbal Control Unit (GCU)
  • Lens Retaining Ring
  • Mounting Bracket × 4
  • Mounting Board for Receiver
  • Cable Clamp
  • Camera Mount Screw x 2
  • Lens Retaining Ring Screw
  • Screw Package
  • 10-Pin to 9-Pin Cable × 2
  • 7-Pin Cable
  • 8-Pin to 6-Pin Cable × 2
  • Camera Record Control Cable
  • Servo Cable Package
  • AV Video Power Cable
  • iOSD Mark II Cable
  • Micro-USB Cable
  • CAN-Bus Cable
  • Spare Package