DJI Spreading Wings S1000+ + A2 + Zenmuse Z15-A7 Price in Pakistan


Model: CB.SB.000042


Availability: Out of stock New

Availability: Out of stock

  • Zenmuse Z15-A7 Gimbal for Sony a7S / a7R
  • Gimbal Provides 360° Camera Rotation
  • Collapsible Frame and Folding Props
  • Up to 24 Pound Total Take-Off Weight
Stock Request Notify When Available

Supporting a total takeoff weight of 24 pounds, the Spreading Wings 1000+ with Zenmuse Z15-A7C Gimbal is a hexcopter from DJI that allows you to capture aerial video using a separately available Sony a7S or a7R mirrorless camera with the Sony FE 35 mm f/2.8 ZA lens. It features carbon fiber frame arms to cut down on weight, which fold down for storage and transport. The included Z15-A7 gimbal helps keep the camera stabilized and isolated from vibration, and allows you to pan, tilt, and even cant the camera for more dynamic shots. Used with a 6S 15,000mAh battery, available separately, the S1000+ can fly for up to 18 minutes fully laden.

This version of the S1000+ features the DJI A2 flight control system, a collection of hardware which acts as the hexcopter's brains. It takes data from the GPS, gyros, barometer, and other sensors while applying any pilot inputs to help ensure stable flying and smooth video. The A2 can be configured for different flying styles and pilot skill levels, with features like Intelligent Orientation Control (IOC), Point of Interest (POI), one motor fail protection, and a Return-to-Home fail safe in the event contact is lost with the transmitter.

The S1000+ is not a ready-to-fly (RTF) aircraft. It does require some assembly and a transmitter (hand-held radio controller) and batteries are not included. Transmitters the A2 supports include ma wide range PCM or 2.4 GHz models that have at least 7 channels. For power, it uses LiPo flight batteries in 6S configuration, with a 10,000 to 15,000 mAh capacity, and requires a discharge rate of at least 15C.

In the Box

  • DJI Spreading Wings S1000+
  • Frame Arms ×8
  • Landing Skid Tubes ×2 (with Silicone Rubber Dampers)
  • Landing Gear Legs ×2
  • GPS Collapsible Mount
  • Springs ×2
  • Connector Set
  • 3-PIN Connection Cables ×8
  • CW propellers ×2
  • CCW propellers ×2
  • Magic tapes ×4
  • The red knobs ×8
  • Soft dampers ×50
  • Screw For frame arms mount: M4×35
  • Screw For landing gear mount: M3×8, M2.5×8 (socket cap), M3×22 (socket cap)
  • Controller Unit (Built-in Receiver DR16)
  • PMU(Power Management unit)
  • IMU(Inertia Measurement Unit)
  • LED-BT-I
  • Micro-USB Cable
  • Servo Cables (2)
  • GPS Bracket
  • Double side sticky pads.
  • Gimbal
  • Gimbal Controller Unit (GCU)
  • Mounting Bracket × 4
  • Mounting Board for Receiver
  • Camera Mounting Screw
  • Screw Package
  • 10-Pin to 9-Pin Cable × 2
  • 7-Pin Cable
  • 8-Pin to 6-Pin Cable × 2
  • Servo Cable Package
  • AV Video Power Cable
  • iOSD Mark II Cable
  • Micro-USB Cable
  • CAN-Bus Cable
  • Spare Package