Kingston 32GB Module - DDR3 1866MHz Server Memory Price in Pakistan

By: Kingston

Model: KVR18L13Q4/32

Sku: TAI6551TAA

Availability: Out of stock New

Availability: Out of stock

  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ=1.5V (1.425V ~ 1.575V)
  • 933MHz fCK for 1866Mb/sec/pin
  • 8 independent internal banks
  • Programmable CAS latency: 13, 11, 10, 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • 8-bit pre-fetch
  • Burst Length: 8 (interleave without any limit, sequential with starting address “000” only), 4 with tCCD=4 which does not allow seamless read or write (either on the fly using A12 or MRS
  • Bi-directional Differential Data Strobe
  • Internal (self) calibration: Internal self calibration through ZQ pin (RZQ: 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • On-DIMM thermal sensor (Grade B)
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°Co
  • Asynchronous Reset
  • PCB: Height 1.195” (30.35mm), double sided component
Stock Request Notify When Available

ValueRAM’s KVR18L13Q4/32 4G x 72-bit (32GB) DDR3-1866 CL13 SDRAM (Synchronous DRAM), 4Rx4, load reduced, ECC memory module, based on thirty-six DDP 2G x 4-bit components. The SPD is programmed to JEDEC standard latency DDR3-1866 timing of 13-13-13 at 1.5V. This 240-pin LRDIMM uses gold contact fingers.

In the Box

  • Kingston 32GB Module - DDR3 1866MHz Server Memory