The AI-enabled guardian that cares for your home and knows you well
Supports HomeKit Secure Video, Amazon Alexa, and Google Home , and makes the compatible child devices support HomeKit, Alexa, Google Assistant, and more.
Thanks to a powerful NPU-equipped processor, the Camera Hub G3 is capable of recognizing faces, gestures, and pets locally, that can be used in notifications and home automation.
The Camera Hub G3 incorporates a high-resolution 2304 × 1296 pixel sensor that results in crystal-clear image quality full of details.
The Camera Hub G3 uses the most modern and universal connector that supports low-latency, high-definition video output via UVC protocol.
The Camera Hub G3 is not only a camera, but also with an embedded smart home hub. It can connect up to 128 Aqara devices and enjoy home automation, remote control, and more.**
The G3 has a built-in IR controller that can make your existing infrared-compatible devices smart and support local automations. Moreover, all the IR automations are local and will run even if there is no internet connection.
110° wide-angle lens coupled with the Pan and Tilt motors provides up to 360° rotation angle, supports automatic cruising, and face and pet tracking.
No more worrying about network type compatibility: the Camera Hub G3 supports both of the most popular Wi-Fi frequencies, and uses them to connect your Aqara child devices to the network.
Apple HomeKit, Amazon Alexa, Google Assistant, IFTTT, Yandex Alice, VK Marusya are supported.
The Camera Hub G3 is only exposed to HomeKit, Google Home and Amazon Alexa as a camera. At the same time, it exposes the supported Aqara child devices to Apple HomeKit, Amazon Alexa, Google Assistant, IFTTT, Yandex Alice, VK Marusya and/or makes them controllable by voice.
By importing your photos, it can trigger personalized automations when you come home
The smart home control has become simpler and more fun than ever! You can configure the actions, that will be triggered in case the camera recognizes one of the following gestures:
The G3's Pan/Tilt motor can be controlled by the pre-configured cruising path, a pet or person being tracked, via automations (such as, turn to the door in case a Door and Window Sensor was triggered) or manually.
The Camera Hub G3 incorporates a high-resolution 2304 x 1296 pixel sensor that results in crystal-clear image quality full of details. Implemented dynamic bit rate technology, the cruise image is also clear.
With a built-in Zigbee 3.0 hub, it can connect up to 128 Aqara sensors and controllers* and enjoy home automation, remote control, and third-party ecosystem support. Its built-in IR controller can make your existing infrared-compatible devices smart and support local automations as well.
The G3 Camera Hub has a hardware privacy protection mode that can be turned on manually or automatically. This mode can be easily identified by a cute sleepy face.
The data streams from the camera are encrypted and the latest Wi-Fi security standard WPA3 is supported to further protect your data.
The camera is certified by Apple, Google, and Amazon to meet all the security standards of the system of your choice.
IF：The sensor is triggered THEN： The G3 will turn to the sensor and record all the events. Moreover, all these events can be automatically marked on the video timeline.
The Camera Hub G3 will connect all of your Aqara sensors, controllers, and IR-enabled devices to control them via smart home automations. At the same time, it will guard your security by turning on the siren and notifying you in case an unknown person arrives at your home or any of your sensors are triggered while you are out. All of these incidents will be recorded to your local or cloud storage.