Amprobe INSP-3 Wiring Inspector Circuit Tester Price in Pakistan

By: Amprobe

Model: 3503207

Sku: BADX1X9XYO

Availability: Out of stock New

Availability: Out of stock

  • Finds most common wiring problems, including:
  • Faulty splices and connections
  • Incorrect wiring
  • Undersized wiring
  • Faulty GFCIs
  • Faulty or incorrectly wired AFCIs
  • Incorrect line voltage
  • Poor ground quality
  • Presents relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) on a single large display
  • Verifies that wiring tested for load carrying ability meets electrical code recommendations for voltage drop under load
  • Detects faulty wiring without removing outlets cover plates or panel covers
  • Flashing screen clearly indicates incorrect wiring or voltage drop test failure
  • Offers user-selectable 10, 15 and 20 amps load testing to verify electrical system performance
  • Will not trip circuit breakers or blow fuses during the test
  • Checks grounding quality for safety and the ability to support sensitive electronic equipment
  • Measures fault currents
  • Tests GFCI and AFCI operations
  • Load: Constant 10, 15 or 20 AMP simulation regardless of line voltage
  • Operating voltage: 95 V AC → 120 V AC, +/- 2 % + 2 digits
  • GFI trip: 6.0 mA nominal to trip GFI, 30 mA to trip RCD
  • AFCI trip: Up to 8, 120 AMP pulses within 1/2 second period
Stock Request Notify When Available

The rugged Amprobe INSP-3 Wiring Inspector Circuit Tester verifies in seconds whether a building’s wiring (including voltage drop under load) complies with electrical code. This saves time and money by eliminating guess work. The large display shows all relevant test data so you can quickly identify issues with splices, connections, and conductor quality that are crucial to safety and performance, without scrolling or switching screens. Select a 10, 15, or 20 amp load on the electricity tester then read the results. A flashing screen clearly indicates incorrect wiring or failures. This wire tester won’t trip circuit breakers or blow fuses during the test.

  • INSP-3 Notice: Do not use the INSP-3 to test AFCI protection (Arc Fault Circuit Interrupter) on the following breaker: Eaton (Cutler Hammer) BRCAF120CS (20A), Due to unique design of the AFCI protection, the INSP-3 is not able to trip it. The INSP-3 can perform all other tests on this breaker per user manual, This is the only known breaker type that the INSP-3 has limitations with testing (tripping) AFCI protection.

In the Box

  • Amprobe INSP-3 Wiring Inspector Circuit Tester
  • 9 V alkaline battery (installed)
  • Carrying case